Dopo mesi e mesi di ricerche mi sono fatto un'idea un po' più precisa di cosa si intende per sanificazione e come va fatta. Nei topic passati avrete letto i miei dilemmi su sistemi con o senza risciacquo per quanto riguarda lo Iodophor. Il problema nasceva dal fatto che non avendo a disposizione la concentrazione del prodotto venduto dalla VINOFERM ero impossibilitato a fare una soluzione con ppm di Iodio note.
Intanto specifichiamo che i termini Sanificazione, Disinfettazione e Sterilizzazione non sono intercambiabili, e non sono nemmeno termini che si riferiscono a valori universalmente riconosciuti ( in USA addirittura dipende da stato a stato) in generale cmq giusto per avere un'idea we say that for sanitation means the removal of 99.9% of biological components from a surface, for the elimination of 99.99% disinfection and sterilization of course 100%. Please note that the actual sterilization is not possible to do at home, an autoclave is used because not enough Occor temperature but also high pressure.
When I say I refer to all biological components or fungi, bacteria, spores, etc. etc.. And now here we would have to point out that not all methods work for everyone. Some sanitizers agiuscono better on some other things on other etc..
Among the best known are sanitizers: sodium hypochlorite solutions (bleach), iodine, heat (oven or what you want), Starsan (I do not think is available in Italian). The American sites in the sodium metabisulfite is not even mentioned as this is a mild inhibitor and not a sanitizer (I'm not a biologist and I do not know what this is correct if you are interested verified)
It 'clear that if I reach that 99 , 9% in the rinse I have to avoid, hence my search for no-rinse method. Starsan apart from the iodophor is certainly one of the most valid. Of all the hand sanitizers is that which serves a lower concentration to complete the work (even less bleach believe it or not) in the sense that enough of 12.5 ppm iodine solution and contact time (non-immersion , but the contact! Simply spray on the surface) from 2 min to get a sanitized surface. When preparing a solution in 2 min 25ppm always results in a surface disinfected (but then I have to rinse before adding the juice). If you think you can hear a level of 12.5 shares per million taste of iodine are a bit 'pretentious, considering that the few drops that remain on the surface are diluted in an additional 20 liters of must at least ... and even exaggerated doses of 100 ppm of iodophor rinse without giving unwanted flavors. Just to make an example in the interview from which I took part of this info was said to feel the taste of iodine should mix a teaspoon of iodophor in a pint of water, and also in case that not everyone would be able to.
(the interview -> iodophor )
But then how do I prepare a solution to 12.5 ppm of iodophor? The solution is to use a product in which the concentration of iodine is reported and the only product I've found is 10% Betadine ®. E 'in the sense that exactly one iodophor and iodine in a carrier-polymer, and is used in the medical-surgical skin as a disinfectant (sanitizer is also why they use it dilute the pure mica). Here are the features: Betadine link.
The bill is to do the following: as in 100 [ml] of product there are 10 [g] in principle active, of which 10% are iodine, 100 [ml] is a product of [g] of iodine. So in 0.1 [ml] of a product I [mg] of iodine. For
I mix 12.5 12.5 ppm [mg] of iodine in 1 [kg] of water (one liter), then I need (0.1 * 12.5) [ml] solution.
In conclusion, a solution of 12.5 ppm iodine is made by mixing 1.25 [ml] of Betadine, per liter of water. Clearly, 1.25 [ml] unless one has a burette at home is a little 'hard to measure, but already in 10 liters of water are 12.5 [ml] and with a syringe volume of this kind are easily measured with Error decent (if he is 13 [ml] of a solution instead of 12.5 nobody died, surely you are those under 25ppm).
This solution has a yellow color, like a pilsner that is. The pictures you find on the net with tanks full of red liquid is certainly excessive doses of iodophor that require rinsing and yellowing polymeric materials that get wet. Having said that we must remember that the solution is effective for a few hours then most of the iodine evaporates, as well as the vial of Betadine has a maturity (several years).
soon for updates and HAPPY BREWING!
LOW TIDE
HIGH TIDE